Views: 653 Author: KAIOU Publish Time: 2023-08-11 Origin: Site
The maintenance of DTF printers should focus on prevention! No matter what kind of printer it is, we just need to keep the environment and the printer clean. And try to reduce the number of times to open the front cover, and pay attention to speed up the replacement of ink cartridges/toner. Can achieve the purpose of being "maintenance-free". In addition, clean the inside of the powder shaking machine, usually once every 2-3 months. After cleaning, a nozzle test should also be performed to see if the printer is functioning properly.
Here is the content list:
l Comprehensive performance index of DTF printer
l Top 10 Causes of DTF Printer Blockage
Comprehensive performance index of DTF printer
The so-called comprehensive performance indicators refer to a series of rigid indicators such as printing resolution, printing speed, and maximum printing size. When choosing a DTF printer, you must pay attention to these indicators, which directly affect the future use and quality of the DTF printer. In addition, Fabric printers use vector raster converter technology to rasterize vector graphics first, then convert the processed dot matrix data into scan line number data, store them in the output buffer, and output them through the nozzle controller. The nozzles form the image. The technique requires advanced software to implement and cannot be drawn without an image. When choosing a DTF printer, look at its software support environment and whether it supports a large number of software.
Top 10 Causes of DTF Printer Blockage
1. The first is the bubble plug. The defoaming performance of the ink is not good, and air bubbles will be generated in the ink. Once the air bubbles enter the print head, it is difficult to come out, causing air blockage.
2. Debris plug. Tiny particles in the ink get into the nozzle, clogging the narrow channels of the ink.
3. Filter plug. The sundries and harmful solvents in the inferior ink are blocked in front of the filter screen, and they will be blocked for a long time.
4. Dry plug. If the nozzle is not used for a long time, the ink will dry up and cause blockage.
5. Chemical plug. With inks of different properties, after a chemical reaction, debris may cause clogging.
6. Corrupted plugs. When the temperature is high, bacteria multiply in the ink, the ink becomes corrupt, and debris appears inside the print head.
7. to clog up. The ink itself is very hard in water during the production process. If this ink is used for a long time, dirt will remain in the nozzle, resulting in a smaller effective diameter of the nozzle, which often begins with horizontal stripes on the nozzle.
8. Oil plug. DTF printer needs lubricating oil, and the lubricating oil will volatilize and spread to the nozzle, changing the physical properties of the nozzle and causing a blockage.
9. Electric plug. The printhead setup checks the electrical performance of the ink or cartridge chips. When there is non-standard ink or chips, the ink valve is closed to varying degrees, and the ink cannot pass through normally, which is called a false plug.
10. Dirty plugs. The print head of the DTF printer is exposed, and the dust particles in the air are adsorbed on the print head to cause blockage.
Our official website is www.kaioutech.com. If you want to know more about DTF printers, you can communicate with us on the website. We will be glad to provide you with a high-quality DTF printer, good service, and competitive prices to provide more and better service!
